Christmas 2017 Place Card with Treat Holder

Hi Everyone!

This project would work equally well for Thanksgiving as Christmas.  In fact, any celebration where you sit down with family and friends to enjoy a meal would be a great way to use these place cards.

The place card stands like a “tent”, and has a little box on the side for a goodie or note.  I show some goodies in the video that will fit into each of the sizes.

  • For the larger Thanksgiving version, I used:
  • Cajun craze card stock: 5″ x 8″, scored on the long side at 1″, 4″, and 7″.
  • Very vanilla card stock with banner die and largest stitched square die.
  • Early espresso card stock with scalloped square to fit sentiment square.
  • Painted Autumn paper, 3″ x 6″, scored on long side at 1/2″, 2 1/2″, 3 1/4″, and 5 1/4″, fold and secure into 2″ by 3/4″ sleeve.
  • The Painted Harvest stamp set with cajun craze and crushed curry inks.
  • See the video for how I cut the place card to accommodate the treat holder.

  • For the smaller one, I used:
  • Cajun craze card stock 4″ x 6″, score long side at 1″, 3″, and 5″.
  • Very vanilla die cut with smallest stitched oval, and 5/8″ by 3 1/2″ for banner.
  • Early espresso die cut with matching scalloped oval, and 1/2″ by 4″ for banner.
  • Painted Autumn paper at 2″ x 4 1/2″, with long side scored at 1/2″, 2″, and 4″, then fold and secure into 1/2″ x 2″ sleeve.
  • Stamped with Painted Harvest sentiment in Cajun Craze ink.
  • See video tutorial for how to cut place card to accommodate holder.

The Christmas themed place cards were made in the same manner, but with Garden Green, Real Red, and Whisper White card stock, Real red ink, Garden Green or Quilted Christmas ribbon, and the Be Merry paper pack.

Just add your guest’s name, and pop in a little treat or note, and it makes for a lively tablescape.  Of course, you may further embellish these to match your decor and celebration!

I hope you enjoy adding these to your holiday celebrations!

Until we meet again, I hope your days are blessed.  ~Darby

*All supplies are Stampin’ Up! unless otherwise noted.

Christmas 2017 Triangle Top Gift Bag

Hi Everyone,

Today’s project is a fun gift bag.  It starts as a 12″ x 12″ piece of paper, and is folded into a bag shape.  These have been around for a bit, and I sized this one to fit a 3-pack of K-cups and a little treat.  The difference comes when we cut a coordinating 6″ x 6″ piece of designer series paper or card stock diagonally and use it for a handle.

What a beautiful packaging to give to someone you love, perhaps with a Keurig 3=pack of their favorite coffees or cocoas, and a tasty treat as well?  The size of the box is 6″ by 2″, and the compartment is ~4″ tall.  You could fit many different gifts in one of these lovely bags.

They will store flat, so you can make a bunch ahead of time!

Start with a 12″ x 12″ piece of paper, if there is a pattern that runs in one direction, score with that side up first at 3″ and 9″.  Turn it 90 degrees, and score at 4 7/8″ and 7 1/8″.   Fold and burnish the score lines.  With the 3″ and 9″ score lines running vertically, fold each edge to the center.  Pivot the closer horizontal fold line out to the edge, and line it up with the corresponding outside fold.  This is hard to describe, but much easier when you see the video.  Do this “pivot” for each corner.

Next, take the 6″ by 6″ piece of paper or card stock, and cut it in half diagonally.  Score a line parallel to, and 1″ from, the diagonal.  I did this on the trimmer, by lining the diagonal line on the 1″ mark.  Now, placing the diagonal along the top edge of the trimmer, place the “point” (the right angle of the triangle) on the 3″ line, which will put one of the acute angles of the triangle about 1″ish past the scoring track, and score.  Flip the triangle horizontally, and score the other acute angle while keeping the right angle on the 3″ line.  Clear as mud?  It is definitely easier and quicker to watch the video.

Glue the and of the bag to one of the handles by lining it up to the 1″ score line, and centering between the other two score lines.  Repeat with the other triangle.  I rounded the top angle of the handle using a 1 1/4″ circle punch, then holding the handles together, punched a 1 1/4″ circle in the center of the handle, as far down as the punch would go.

The 3-pack of K-cups fits perfectly, and I topped it off with some Pfeffernusse cookies tied in a bag.  I used candy canes for the hot chocolate.   Then, I punched a 1/8″ hole, about 1″ in from each side right above the score line, threaded a ribbon through, and tied a bow.  I left the tails long for a beautiful effect.

I hope you enjoy this project!  And, until we meet again, I hope your days are blessed.  ~Darby

  • Supplies are Stampin’ Up! unless otherwise noted.
  • DSP: Be Merry, Merry Little Christmas, Bundle of Love
  • Card stock:  Very Vanilla, Whisper White, Basic Black, Gold Foil, cherry cobbler
  • Ink:  cherry cobbler, garden green, old olive, versamark
  • Ribbon:  Garden Green satin striped, Old Olive mini-chevron, Gold Metallic Edged
  • Stamps:  Good Tidings, Tags & Trimmings
  • Dies: Layering Scallops, Stitched Shapes
  • Other:  Foil Snowflakes, gold embossing powder

Pumpkin Favor Box

Hi Everyone,

Today I have a very cute favor box, that reminds me of a cubic pumpkin.  It was made using the Foil Frenzy Designer Series Paper and the Scalloped Tag Topper Punch from Stampin’ Up!.

Scroll down for a link to the video for this project.

Aren’t they cute?  It would make a fun table favor or place card for Thanksgiving or another festive fall celebration.  I originally made them for the large Hershey’s Kisses, the ones that are just under 2″ diameter at the bottom.  They would fit the pumpkin just as it is.  Sadly, all of my large kisses went missing.  Instead, I made a small box for the inside bottom, just big enough for one Ferrero Rocher, or similar sized candy.

Continue reading “Pumpkin Favor Box”

Arch Top Treat Bag

Hi Everyone,

This is one of those bag-and-a-box bags.  Or is it a box-in-a-bag bag?  Whatever it is called, there’s a box, and the DSP is adhered around it to make a bag.  And these are very sweet!

(Scroll down for a link to the video of this project.)

I am calling them my Arch Top Treat Bag, because it has an arched top, and you can fit the 2×8 cellophane treat bags into them.  Just stuff the cello bag with your favorite treat that fits, then tuck it into this lovely treat bag for a wonderful, elegant, or whimsical gift.

To make the box at the base, start with a 3″ by 2 1/2″ piece of cardstock.  The color is not really important, because it won’t show when they are standing up.  Just pick some card stock scraps you have kicking around your craft space that is the right size, and coordinates or complements the DSP you have selected.  Then, score it a 3/4″ on all four sides.  With the long side towards you, cut up both the score lines, and take a little wedge out of both sides of the square tabs.  Do the same with the other side, add strong adhesive, and stick the box together.  The arched top is creating using the layering ovals, or the stitched shapes ovals, whichever design will give you the look you are going for.  Just find the one that fits the best, and run it partially through the Bigshot.  Then, use a 3/4″ circle punch to create the fingers holes at the top.

(The link to the video of the project is below.) Continue reading “Arch Top Treat Bag”